Kitchen Renovation Service
Kitchen Renovationin Burlington
Millcroft · Alton Village · Roseland · Aldershot
Most Burlington kitchens want a wall gone
Anything built in Halton between 1985 and 2000 was designed with the kitchen closed off from the family room, and that single wall is the reason the space feels dated. Taking it out is a structural job — engineer, stamped drawings, permit, beam — and then a cabinetry job. We do both halves under one contract. Compare against the 2026 kitchen cost guide or read open-concept vs traditional layouts before deciding.
Recent work
Recent kitchens near Burlington
Burlington kitchen renovation cost & timeline (2026)
On-site time only. Cabinetry lead time runs in parallel and typically adds six to ten weeks before day one.
| Scope tier | Cost range | On-site time | Typical inclusions |
|---|---|---|---|
| Cabinet & counter refresh | $18,000–$28,000 | 2–3 weeks | New cabinetry in the existing footprint, quartz counters, backsplash, sink and faucet, under-cabinet lighting, paint. Nothing moves, so no permit. |
| Full rebuild, same footprint | $25,000–$40,000 | 3–4 weeks | Strip to studs, new cabinetry and counters, tile or slab backsplash, flooring, pot lights, dedicated circuits, ducted range hood, appliance install. |
| Full rebuild + layout change | $35,000–$50,000 | 4–5 weeks | Everything above plus an island added or moved and the sink or dishwasher relocated — new plumbing rough-in, electrical, permit, and inspections. |
| Add open-concept wall removal | +$15,000–$35,000 | +1–3 weeks | Load-bearing wall opened with an engineered LVL or steel beam, stamped engineer drawings, permit, and floor patching across the new opening. |
Burlington neighbourhoods we work in
Kitchen renovation in Millcroft
Late-1980s and 1990s detached with the kitchen walled off from the family room. Opening that wall with an engineered beam is the most common Millcroft kitchen scope, and it is what turns a dated plan into a current one.
Kitchen renovation in Alton Village & The Orchard
Post-2000 subdivisions with kitchens already open-plan. The work here is a straight rebuild at a higher spec: bigger island, quartz counters, panelled appliances, full-height slab backsplash.
Kitchen renovation in Roseland & Downtown Burlington
Mature streets south of the QEW with older, smaller kitchens and higher expectations for finish. Custom cabinetry pays off in these houses because the walls are rarely square.
Kitchen renovation in Aldershot
Bungalows and older detached on the west side. Kitchens are often original, with two circuits serving four appliances. Electrical upgrade is usually part of the scope, not an optional extra.
Kitchen renovation in Tyandaga & Brant Hills
Split-levels and 1970s detached where the kitchen is small and closed. The gain usually comes from a layout change rather than a like-for-like replacement.
Make the Right Choice
Why homeowners chooseOsoba Renos Osoba Renos & Design
Home Remodeling Contractor in Toronto & GTA — clear pricing, in-house trades, and a guaranteed timeline.
Clear Pricing
Full transparency. After your free estimate we share a detailed proposal based on precise measurements — no hidden costs, no last-minute surprises.
5-Year Warranty
Our quality commitment, in writing. For up to 5 years after we deliver your project, our workmanship is covered — no exceptions.
In-House Trades
An experienced full-time crew — not a rotating cast of subs. Same faces, consistent quality, and a stress-free site from day one.
Dedicated Project Manager
One point of contact who runs the whole project on your behalf and resolves anything that comes up — quickly, without you chasing.
Guaranteed Timeline
A structured schedule with clear milestones, planned around every phase — so your project finishes on the date we set together.
What's included
Kitchen Renovation Features
Custom Cabinetry
Cabinets built to your layout — full-height uppers, deep drawers, pull-outs, and soft-close hardware throughout.
Quartz & Porcelain Countertops
Templated and installed by our fabricator, with undermount sink cut-outs and waterfall or mitred edges.
Islands & Breakfast Bars
Islands with seating, hidden storage, and — where the plumbing allows — a relocated sink or prep zone.
Tile & Slab Backsplashes
Full-height slab, large-format porcelain, or classic tile, cut around outlets and under-cabinet lighting.
Electrical & Lighting Updates
Pot lights, under-cabinet strips, pendants over the island, and the dedicated circuits code now requires.
Plumbing Relocations
Moving the sink or dishwasher when the layout calls for it, with permits pulled and rough-ins inspected.
Appliance Integration
Panelled fridge and dishwasher fronts, built-in wall ovens, and proper make-up air for high-CFM hoods.
Range Hoods & Ventilation
Ducted hoods vented to the exterior — not recirculating — sized to the range beneath them.
Flooring
Engineered hardwood, large-format porcelain, or luxury vinyl plank, levelled and transitioned to adjacent rooms.
Open-Concept Wall Removal
Load-bearing walls opened with an engineered LVL or steel beam, drawings stamped and permitted.
Pantry & Storage Millwork
Walk-in or cabinet pantries, coffee stations, and banquette seating built into the cabinetry run.
Paint & Finishing
Trim, crown, baseboards, and a full paint finish so the kitchen reads as part of the rest of the floor.
People also ask
Kitchen renovation questions - Burlington
How much does a kitchen renovation cost in Burlington?
Between $25,000 and $50,000 for most Burlington kitchens in 2026. A cabinet and counter refresh in the existing footprint is $18,000-$28,000, a full rebuild is $25,000-$40,000, and a layout change with relocated plumbing is $35,000-$50,000. Removing a load-bearing wall adds $15,000-$35,000.
Do I need a City of Burlington permit for a kitchen renovation?
Yes if plumbing moves, circuits are added, or a wall comes out. No for cabinets, counters, and finishes in the existing layout. We file the application with the City of Burlington, including the stamped structural drawings when a beam is involved.
How long does a Burlington kitchen renovation take?
Three to five weeks on site. Cabinetry lead time runs before that — six to ten weeks for semi-custom from final measure, twelve or more for full custom — which is what sets your start date, not the trades.
Is Burlington inside your service area?
Yes. Burlington sits with Oakville and Milton in our regular Halton service area, 25 to 40 minutes from our Mississauga shop, with no travel surcharge on the quote. The projects above are our closest completed kitchens, in Oakville and Mississauga.
Can you open the wall between the kitchen and family room?
In most Millcroft and Tyandaga homes, yes. It needs a structural engineer to size the beam, stamped drawings, a City of Burlington permit, and patching across the new opening in both the floor and the ceiling. Budget $15,000-$35,000 depending on span and whether ducting has to move first.
What is the realistic lead time to start?
Four to eight weeks from a signed contract to demolition, and the cabinet order goes in during that window. Spring and early fall book fastest in Halton. If you want a kitchen finished before the December holidays, sign by early September.
Also serving
Kitchen renovation in nearby areas
Let’s talk
Contact Osoba Renos & Design
Planning a kitchen renovation in Burlington? Book a free in-home estimate and we will measure the room.
- Phone647-562-4275
- E-mailosobarenos@gmail.com
- Service areaMississauga & GTA